Description
This Product Has Been Retired. I Have No Plans To Make More In The Future. This Page Remains Only For Posterity.
SNES CSYNC Dejitter Mod Board and Installation Service.
Marqs’ SNES CSYNC Dejitter mod board fixes the the SNES’s out of spec RGB C-Sync signal which causes issues with some displays and capture cards, especially when used with a device like the Open Source Scan Converter. In my testing this dejitter board can enable line3x, line4x and line5x modes on the OSSC with displays that previously could not sync with anything higher than line2x. In addition to installing the mods I also hand assemble all of these boards right here in the United States because I’m a crazy person. I also stream a lot of my builds on Youtube if you want to see my work.
There are 2 purchasing options for this board:
If you plan to install the mod yourself simply select Self Installation in the drop down options, If you wish to send your console in for modding service, select Professional Installation and I will provide shipping instructions after checkout.
Documentation:
Please note that this is an open source project and I do not offer documentation aside from a link to the github for this project. You are on your own for installation.
https://github.com/marqs85/snes_dejitter
Processing time for orders is between 1 and 5 days. I assemble all of these boards by hand. When a product is listed in stock this means that I have all of the components to build the board, but it does not necessarily mean that the boards are already assembled. If I have boards ready at the time of your order then processing and shipping your item should only take 1 day. If I have to assemble one or more products in your order, processing and shipping could take up to 5 days. I appreciate your patience, I’m a one man show over here.
IMPORTANT SHIPPING INFORMATION
Nathan-eel (verified owner) –
I am ecstatic, I have a Sony X800E, and previously my 1 Chip SNES wouldn’t sync on a single output mode from the OSSC without constant dropouts, or just flat out no signal. After installing this board I was amazed to see ALL line modes: 240p passthrough, Line2x, 3x, 4x, and 5x working flawlessly. I cannot recommend this board highly enough for those of you unfortunate enough to have a picky display. Thanks a lot for stocking these even while VGP is out of stock! 10/10
Nathaniel (verified owner) –
I am ecstatic, I have a Sony X800E, which would previously not sync with my 1 Chip SNES through the OSSC consistently at all, constant dropouts or just flat out no signal. After installing this mod I’m happy to report that ALL line modes: 240p passthrough, Line2x, 3x, 4x, and 5x are working flawlessly! Installation was a breeze, if you have the tools I cannot recommend it highly enough, thanks for stocking the boards even while VGP is out! 10/10
Scott (verified owner) –
Snes now is successful at 5x lines on my oSSC. Board does as its intended and came with the extra ribbon cable needed to do the install. I am a very happy customer and will get all my mod needs here when I can.
Cray Elliott –
I ordered an installation on my pre-modded 1chip SNES with THS7374 amp installed and c11 cap replaced, and I’m very happy with the results. My capture cards now all work with my SNES at line4x and line5x. Installation was fast and shipment was speedy.
Thanks!